ASTM

1 case · 1 image

Crevice Corrosion in a Subsea System — Aspect Before Analysis

Microstructure: Austenitic Matrix Capture method: Aspect Before Analysis clear all

ASTM — sub-branches

A 1

Results

SortNewestOldestTitle A-ZTitle Z-A
Condition of the joint between the centrifugally cast tube (bottom) and the buttered fitting (top). During this welding the cast fitting (buttered) showed several cracks but after removal of the fitting it was clear that the cracks were formed during the buttering and not during the joining.
46
VIEW
ML00173 / May.2021
Welding Cracks in an Aged HP Cast Fitting
M - Heat Resistant SteelP - Cast FtittingAp - PetrochemicalCd - Welding
Cm - Aspect Before AnalysisDf - General View