Aspect Before Analysis

1 case · 1 image

Crevice Corrosion in a Subsea System — Aspect Before Analysis

Condition: Damage Microstructure: Martensite and Carbides Detail focus: Internal Surface clear all

Results

SortNewestOldestTitle A-ZTitle Z-A
Aspect of the internal diameter surface presenting several cracks in the axial direction, caused by the contact with the shaft. The roller bearing presented a too low hardness level (21 HRc average) in this ID position.
90
VIEW
ML00131 / Apr.2018
Brittle Failure of a Soft Roller Bearing
M - Wear Resistant SteelP - Roller BearingAp - Mechanical IndustryCd - Heat Treatment Defect
Cm - Aspect Before AnalysisDf - Internal Surface